Search Results

The use of vegetable oil as a fuel for agricultural and forestry vehicles allows a CO2 reduction of up to 60 %. On the other hand, the availability of vegetable oil is limited, and price competitiveness depends heavily on the respective oil price. In order to reduce the dependence on the availability of specific fuels, the joint research project “MuSt5-Trak” (Multi-Fuel EU Stage 5 Tractor) aims at developing a prototype tractor capable of running on arbitrary mixtures of diesel and rapeseed oil. Depending on the fuel mixture used, the engine parameters need to be adapted to the respective operating conditions. For this purpose, it is necessary to detect the composition of the fuel mixture and the fuel quality. Regardless of the available fuel mixture, all functions for regular engine operation must be maintained.

Door slam test is one of the important durability tests in door design and development. Door requires to meet certain performance requirements like it should close properly (no metal to metal contact), there should not be any leakage, and closing operation should be smooth & with minimal effort and it should survive the life of the vehicle. Virtual simulation of door slam test, correlation with physical test results and effect of various parameters like seals stiffness are demonstrated in this study. Slam Analysis was carried out in LS-Dyna solver before physical test. This not only helped in avoiding initial structural design flaws, but also helped us in deciding door latch position, effect of mass distribution in the door and study of force distribution between primary seal, secondary seal and door latch. Primary and secondary seals played a critical role in the analysis. An intended length of both the seals was tested first to get its stiffness curve.

Nowadays, green hydrogen can play a crucial role in a successful clean energy transition, thus reaching net zero emissions in the transport sector. Moreover, hydrogen exploitation in internal combustion engines is favoured by its suitable combustion properties and quasi-zero harmful emissions. High flame speeds enable a lean combustion approach, which provides high efficiency and reduces NOx emissions. However, high air flow rates are required to achieve the load levels typical of heavy-duty applications. In this framework, the present study aims to investigate the required boosting system of a 6-cylinder, 13-liter heavy-duty spark ignition engine through 1D numerical simulation. A comparison among various architectures of the turbocharging system and the size of each component is presented, thus highlighting limitations and potentialities of each architecture and providing important insights for the selection of the best turbocharging system.

THE introduction to this paper includes definitions of the major items under discussion, and is followed by a discussion of the materials most widely used in metal-aircraft construction and their important physical properties. In the remainder of the paper are described some of the problems encountered in metal construction and the processes that have been developed to facilitate manufacture. The following specific items are discussed: (1) Design, (2) Tooling, including lofting, (3) Fabrication, (4) Assembly, (5) Inspection, and (6) Protective coating. Special equipment and tools are illustrated.

The hydrogen engine is one of the promising technologies that enables carbon-neutral mobility, especially in heavy-duty on- or off-road applications. In this paper, a methodological procedure for the design of the combustion system of a hydrogen-fueled, direct injection spark ignited commercial vehicle engine is described. In a preliminary step, the ability of the commercial 3D computational fluid dynamics (CFD) code AVL FIRE classic to reproduce the characteristics of the gas jet, introduced into a quiescent environment by a dedicated H2 injector, is established. This is based on two parts: Temporal and numerical discretization sensitivity analyses ensure that the spatial and temporal resolution of the simulations is adequate, and comparisons to a comprehensive set of experiments demonstrate the accuracy of the simulations. The measurements used for this purpose rely on the well-known schlieren technique and use helium as a safe substitute for H2.

For the purpose of achieving carbon-neutrality in the mobility sector by 2050, hydrogen can play a crucial role as an alternative energy carrier, not only for direct usage in fuel cell-powered vehicles, but also for fueling internal combustion engines. This paper focuses on the numerical investigation of high-pressure hydrogen injection and the mixture formation inside a high-tumble engine with a conventional liquid fuel injector for passenger cars. Since the traditional 3D-CFD approach of simulating the inner flow of an injector requires a very high spatial and temporal resolution, the enormous computational effort, especially for full engine simulations, is a big challenge for an effective virtual development of modern engines. An alternative and more pragmatic lagrangian 3D-CFD approach offers opportunities for a significant reduction in computational effort without sacrificing reliability.

Lean-burn hydrogen internal combustion engines are a good option for future transportation solutions since they do not emit carbon-dioxide and unburned hydro-carbons, and the emissions of nitric-oxides (NOx) can be kept low. However, under lean-burn conditions the combustion duration increases, and the combustion stability decreases, leading to a reduced thermal efficiency. Turbulent jet ignition (TJI) can be used to extend the lean-burn limit, while decreasing the combustion duration and improving combustion stability. The objective of this paper is to investigate the feasibility of a passive pre-chamber TJI system on a heavy-duty hydrogen engine under lean-burn conditions using CFD modelling. The studied concept is mono-fuel, port-fuel injected, and spark ignited in the pre-chamber. The overall design of the pre-chamber is discussed and the effect of design parameters on the engine performance are studied.

Mixture formation in a hydrogen-fueled heavy-duty engine with direct injection and a nearly-quiescent top-hat combustion chamber was investigated using laser-induced fluorescence imaging, with 1,4-difluorobenzene serving as a fluorescent tracer seeded into hydrogen. The engine was motored at 1200 rpm, 1.0 bar intake pressure, and 335 K intake temperature. An outward opening medium-pressure hollow-cone injector was operated at two different injection pressures and five different injection timings from early injection during the intake stroke to late injection towards the end of compression stroke. Fuel fumigation upstream of the intake provided a well-mixed reference case for image calibration. This paper presents the evolution of in-cylinder equivalence ratio distribution evaluated during the injection event itself for the cylinder-axis plane and during the compression stroke at different positions of the light sheet within the swirl plane.

In an accident reconstruction, vehicle speeds and positions are always of interest. When provided with scene photographs or fixed-location video surveillance footage of the crash itself, close-range photogrammetry methods can be useful in locating physical evidence and determining vehicle speeds and locations. Available 3D modeling software can be used to virtually match photographs or fixed-location video surveillance footage. Dash- or vehicle-mounted camera systems are increasingly being used in light vehicles, commercial vehicles and locomotives. Suppose video footage from a dash camera mounted to one of the vehicles involved in the accident is provided for an accident reconstruction but EDR data is unavailable for either of the vehicles involved. The literature to date describes using still photos to locate fixed objects, using video taken from stationary camera locations to determine the speed of moving objects or using video taken from a moving vehicle to locate fixed objects.

The fuel economy and emission of the hybrid vehicle depend largely on the selected engine. And the dedicated hybrid engine (DHE) can be controlled to operate in the optimal operating range because DHE can be decoupled from the vehicle transmission system. The main purpose of this paper is to improve the thermal efficiency of the diesel engine under common operating conditions combined with high compression ratio (CR) and early or late intake valve closing (IVC) angle. According to the vehicle road spectrum data, the optimal operating range of the engine is determined to be 1200-1400 rpm and 70%-90% load. Then CR and IVC angle are optimized by using the calibrated one-dimensional thermodynamic model of the engine under limited peak combustion pressure (Pmax). The results show that the adjustment of IVC angle and CR can control the thermal state at the end of compression stroke. The combination of CR and IVC angle can achieve the optimal fuel consumption improvement.

Commercial vehicle powertrain is called to respect a challenging roadmap for CO2 emissions reduction, quite complex to achieve just improving technologies currently on the market. In this perspective alternative solutions are gaining interest, and the use of green H2 as fuel for ICE is considered a high potential solution with fast and easy adoption. NOx emission is still a problem for H2 ICE and can be managed operating the engine with lean air fuel ratio all over the engine map. This combustion strategy will challenge the boosting system as lean H2 combustion will require quite higher air flow compared to diesel for the same power density in steady state. Similar problem will show up in transient response particularly when acceleration starts from low load and the exhaust gases enthalpy is very poor and insufficient to spin the turbine. The analysis presented in this paper will show and quantify the positive impact that a supercharger has on both the above mentions problems.

In order to resolve global atmospheric environmental issues, latest diesel engines for industrial machinery are required to reduce the emission of harmful gases such as carbon monoxide (CO), hydrocarbon (HC) and nitrogen oxide (NOx), and particulate matter (PM). For this reason, it is essential to mount exhaust gas after treatment devices such as diesel particulate filter (DPF) and diesel oxidation catalyst (DOC) on diesel engine. Engines mounted DPF must carry out DPF regeneration that burns and removes PM. Generator engine has characteristic of being operated for a long time under light load condition with low exhaust temperature which is difficult for DPF regeneration. In addition, generating white smoke and inlet face clogging of DOC are caused by accumulated soot containing HC at the DOC when operating engine continuously under light load condition.

Lifting axles are auxiliary axles that provide increased load carrying capacity in heavy commercial vehicles. Lift axle gives better fuel efficiency as well as it reduces the operational costs by means of increasing the loading carrying capacity. These axles are raised when the vehicle is in unloaded condition, thus increasing the traction on remaining wheels and reducing the tire wear which in turn lower down the maintenance cost of the vehicle. Lifting height and force requires to lift the whole mechanism and are two main considerable factors to design the lifting axle mechanism. Although in India currently, the use of lift mechanism of single tire with continuous axle is more common. But in the case of pusher axle, continuous axle is unable to lift more after certain height because of the draft angle of the propeller shaft, and single tire axle which has less load carrying capacity up to 6T (Tons).

The hydrogen (H2) internal combustion engine (ICE) is emerging as an attractive low life-cycle carbon powertrain configuration for applications that require high power, high duty cycle operation. Owing to the relative ease of conversion of heavy duty (HD) diesel ICEs to H2 and the potential for low exhaust emissions, H2 ICEs are expected to play a strong role in rapidly decarbonizing hard-to-electrify markets such as off-road, rail, and marine. The conversion of HD diesel ICEs to spark ignited H2 with port fuel injection is typically accompanied by a de-rating of engine power and torque. This is due to several fuel- and system-related challenges, including the high risk of abnormal combustion resulting from the low auto-ignition energy threshold of H2, and boost system requirements for highly dilute operation that is used to partially mitigate this abnormal combustion risk.